Скрит текст за SEO-то
Gas burners
Description
GAS Burners GIERSCH G.m.b.h.
Gas burner series RG
Suitable for natural gas, liquid gas or town gas, for a low or high heat requirement, for a heating boiler or industrial applications, for new installations or for conversion from oil to gas.
The RG series is
supplied complete with high-grade
valve fittings, the requisite
connection elbows, unions and gas ball cock.
The burner concept provides -two-stage- or modulating-operation. The burner gives off more or less power depending on the heat requirement. Burner starts and the prescavenging losses and startup emissions associated with them are reduced to a minimum. The annual utilization ratio is increased. The modulating output control operates with a gas/air compound. Combustion is constant over the entire working range. The pressure-stable blower ensures safe startup behaviour.
GIERSCH
does not invest only in intelligent solutions to technical problems, but
also in production, high-grade materials, careful assembly and strict
final inspection with unerring inspection methods. Every GIERSCH gas
burner is tested complete with flame at our works and is preset to a low
output.
All things that make the difference that provides GIERSCH
quality.
Gas burner series MG
High outputs require a pressure-stable blower with prolate burner geometry. This is a technical specification which GIERSCH has realized in the MG series with a well reasoned design.
The MG series has optimized air guidance, providing a quiet
and pressure-stable blower. This blower guarantees safe startup
behaviour, i.e. carefree operation. The air duct through which the
combustion air is taken in is fully lined with a highly effective
silencing material.
The
MG series is equipped with a special mixing device, the GIERSCH NOx
down-mixer. The gas combusts virtually CO free with the NOx - emissions
far below the limits of DIN EN 676.
The high-grade valve fittings on the gas line are pre-assembled at our factory as compact units, and then sealed and tested together with the burner complete with flame. All electrical connections are plug connections. This provides safety and shortens the commissioning time. It also saves you money.
The gas burners MG are equipped for two-stage or modulating modes of operation. The burner gives off more or less power depending on the heat requirement. Burner starts and the pre-purge losses and startup emissions associated with them are reduced to a minimum. The annual utilization ratio is increased. The burners are fitted with an air/gas ratio controller. Combustion is constant over the entire working range.