Скрит текст за SEO-то

GAS Burners GIERSCH G.m.b.h. 

Gas burner series RG  

Suitable for natural gas, liquid gas or town gas, for a low or high heat requirement, for a heating boiler or industrial applications, for new installations or for conversion from oil to gas.

The RG series is supplied complete with high-grade
valve fittings, the requisite connection elbows, unions and gas ball cock.

The burner concept provides -two-stage- or modulating-operation. The burner gives off more or less power depending on the heat requirement. Burner starts and the prescavenging losses and startup emissions associated with them are reduced to a minimum. The annual utilization ratio is increased. The modulating output control operates with a gas/air compound. Combustion is constant over the entire working range. The pressure-stable blower ensures safe startup behaviour.

GIERSCH does not invest only in intelligent solutions to technical problems, but also in production, high-grade materials, careful assembly and strict final inspection with unerring inspection methods. Every GIERSCH gas burner is tested complete with flame at our works and is preset to a low output.
All things that make the difference that provides GIERSCH quality.

Gas burner series MG  

High outputs require a pressure-stable blower with prolate burner geometry. This is a technical specification which GIERSCH has realized in the MG series with a well reasoned design.

The MG series has optimized air guidance, providing a quiet and pressure-stable blower. This blower guarantees safe startup behaviour, i.e. carefree operation. The air duct through which the combustion air is taken in is fully lined with a highly effective silencing material.

The MG series is equipped with a special mixing device, the GIERSCH NOx down-mixer. The gas combusts virtually CO free with the NOx - emissions far below the limits of DIN EN 676.

The high-grade valve fittings on the gas line are pre-assembled at our factory as compact units, and then sealed and tested together with the burner complete with flame. All electrical connections are plug connections. This provides safety and shortens the commissioning time. It also saves you money.

The gas burners MG are equipped for two-stage or modulating modes of operation. The burner gives off more or less power depending on the heat requirement. Burner starts and the pre-purge losses and startup emissions associated with them are reduced to a minimum. The annual utilization ratio is increased. The burners are fitted with an air/gas ratio controller. Combustion is constant over the entire working range.